Portable Drilling Rig Horizontal Directional Drilling Machine Hydraulic Pneumatic Drill Rig

Product Description

Tunnel Turntable Rock Pneumatic Impactor Drilling Machine
The pneumatic rock drilling machine of the disc drill frame is powered by compressed air, and is mainly used for fan-shaped or annular medium-depth blastholes in underground mining fields, and can also be used for underground bolts support.
Turntable rocks drilling machine is a medium and deep hole rock drilling tool powered by compressed air.   The medium-deep hole rock drilling equipment powered by compressed air is mainly used for the stonework engineering of the upward fan-shaped or annular medium-deep hole drilling in the underground mining field.   It is suitable for drilling with a diameter of 50-80mm and a drilling depth of 30m.   Using a cross-shaped alloy drill bit with a diameter of 65mm, the average pure rock drilling speed can reach 680mm/min in F12-14 grade ore. The drill frame is simple in structure, easy to dismantle and transport, and works well.
The disc-type drill frame is an auxiliary device designed and manufactured to adapt to the use of the SR90 type rail-guided independent hydraulic rotary rock drill in small-section mining roadways. It is powered by compressed air to achieve the pushing and positioning functions of the rock drill during drilling.
Compressed air passes through the main intake valve, oil mist lubricator, various control valves and reaches each moving part to achieve the cyclic operation of the rock drilling process.
This drill frame has a simple structure, is easy to disassemble and transport, operates safely and reliably, and is highly efficient. The entire drilling frame is composed of three components: the drilling frame connection part, the propeller connection part and the operation platform connection part. The drilling frame connection part mainly includes three parts: the air top, the disc and the bottom skid. The propeller joint is composed of four components: the brazing device, the guide rail, the slide seat and the propulsion motor. The console assembly includes main components such as the control valve and the oil mist lubricator.
After the drill frame parts are transported to the working point, they should be assembled in the order of the bottom crowbar, air top, disc and propeller. Each part should be cleaned and wiped clean, coated with grease and tightened. Before the main air inlet and water pipes are connected to the control console, all the sand and mud should be blown clean. All the hoses must also be blown clean before being connected to the corresponding parts of the drill frame to prevent sand and mud and other dirt from entering the machine parts.
Positioning and Relocation: According to the design requirements of the rock drill's gun hole, the drill frame should be aligned with the centerline of the tunnel and the gun hole layout line. The plane of the disc should be parallel to the layout line; otherwise, it will affect the effect. Before moving the drill frame, the bottom should be pried out or pushed out to cover the slag surface. If there is a lot of silt on the bottom plate, a wooden board can be placed at the silted part of the plate, and then the drill frame can be moved to another layout line with a crowbar or a traction winch.

Product Description

Parameters	SR 90	SR150
Drilling Hole Diameter	50-80mm	80-140mm
Max. Drilling Hole Depth	35m	180m
Shank Model	φ38mmx90mm
Impact Force	≥225J	15000N
Impact Frequency	≥34HZ	60rpm
Output Torque of Drill Rod	≥140NM	1500-2000NM
Workable Tunnel Dimensions	2.2m x 2.2m - 3.0m x 3.0m	2.2m x 2.2m - 3.0m x 3.0m
Total Air Consumption	≤225L/s	120-350L/s
Drilling Angles	0-360 degrees	0-360 degrees
Mounted	No (Man Portable)	Two Wheels Trailer
Weight for Rocks Drilling Machine	95KG	450KG
Dimensions for Rocks Drilling Machine	890x360x305mm

Company Profile

Certifications

 

Packaging & Shipping

 

FAQ

1.what can you buy from us?
DTH drilling rig,core drilling rig,highway pile driver,solar pile driver ,anchor pile driver
,rotary drill rig ,underground jumbo drill rig ,screw air compressor,DTH hammer,drill rod,
piston air compressor,pneumatic rock drill ,drill bit,tricone bit ,spare parts.

2.How can I make payment?
A:You can pay by credit card, TT, Western Union, LC etc.

3. How is the shipment? How long dose it take?
A: For large quantity or heavy products, we ship by sea shipping or land shipping. Shipping efficiency depends on country and city you want to ship to. For small and delicate products, we ship by DHL, UPS, Fedex or TNT.You can also appoint shipping method you like before we ship.

4.How is your quality control?
A: We have our own experienced QC.There will be strict inspection and testing for every order before shipping out.